|
Nemtek offers an angle iron or round post solution to the free standing corner straining post and end post requirements which generally will be concreted into the ground.
Both the round pole and the angle iron versions are predrilled to fit the Nemtek hot dip galvanised hooks, tensioners and strain insulators saving time.
Nemtek standards are a relatively new addition to the intermediate brackets, used with the pop through insulator for higher security needs.
The wire cannot be removed from the standard without being cut ensuring an alarm.
| Corner and end straining poles |
Number
of wires |
Number
of holes |
Fence
height |
Finish |
Associated Stays |
| Angle Iron 60 x 60 x 6mm - 2.4m |
20 |
2 x 20 |
2m |
Painted or Hot dip galvanised |
Angle 40 x 40 x 5mm - 2.6m |
| Angle Iron 60 x 60 x 6mm - 3m |
24 |
2 x 24 |
2.4m |
Painted or Hot dip galvanised |
Angle 50 x 50 x 5mm - 3m |
| Round Tube 78mm x 2mm - 2.4m |
20 |
2 x 20 |
2m |
Painted or Hot dip galvanised |
Round 2 x 38mm - 2.4m |
| Intermediated posts |
Number
of wires |
Number
of holes |
Fence
height |
Finish |
Associated Insulators |
| Nemtek Standard 2.4m |
20 |
20 |
2m |
Painted or Hot dip galvanised |
Pop through, Y Standard |
| Nemtek Standard 3m |
24/26 |
26 |
2.4/2.6m |
Painted or Hot dip galvanised |
Pop through, Y Standard |
| Y Standard 2.4m |
20 |
48 |
2m |
Bitumen Coated |
Y Standard |
| Y Standard 3m |
24 |
60 |
2.4m |
Bitumen Coated |
Y Standard |
| Y Standard 3.6m |
30 |
72 |
3m |
Bitumen Coated |
Y Standard |
Note: Hole spacing may vary depending on the product batch.
|
|
